Fixit 777
Final render extra white

Fixit 777
  • Mineral-based and biocide-free
  • Extra white
  • Structural diversity
Item numberPackaging typeQuantity per unitUnit per palletGrain size/ColourConsumption
2000634655 Paper sack 25 kg/unit 40 unit/Pal. 1,5 mm Full abrasion 2,1 kg/m²
2000635471 Paper sack 25 kg/unit 40 unit/Pal. 1 mm Full abrasion 1,8 kg/m²
2000663005 Paper sack 25 kg/unit 40 unit/Pal. 2 mm Full abrasion 2,7 kg/m²
2000663006 Paper sack 25 kg/unit 40 unit/Pal. 3 mm Full abrasion 3,65 kg/m²
2000958752 Paper sack 25 kg/unit 40 unit/Pal. 4 mm Full abrasion 5,15 kg/m²
2000958754 Paper sack 25 kg/unit 40 unit/Pal. 4-6 mm Full abrasion 5,35 kg/m²
2000958756 Paper sack 25 kg/unit 40 unit/Pal. 5 mm Full abrasion 5,5 kg/m²
2000958757 Paper sack 25 kg/unit 40 unit/Pal. 1,5 mm Striated structure 2 kg/m²
2000958758 Paper sack 25 kg/unit 40 unit/Pal. 2 mm Striated structure 2,75 kg/m²
2000958759 Paper sack 25 kg/unit 40 unit/Pal. 3 mm Striated structure 3,2 kg/m²
2000958760 Paper sack 25 kg/unit 40 unit/Pal. 5 mm Striated structure 4,9 kg/m²
2000958761 Paper sack 25 kg/unit 40 unit/Pal. 0,5 mm 1,75 kg/m²

Technical documents

TM Fixit 777 Final render extra white en

Technical data sheet

pdf
912 KB
MSDS Fixit 777 Final render extra white en

Material Safety Data Sheet

pdf
417 KB

More recommended products

Fixit 475

Fixit 475

Primer for mineral-based final renderings

Portrait of a female construction worker with a white hard hat and grey jacket in front of a brick wall Shell construction with scaffolding

Benefits of this product

Mineral-based and biocide-free

Extra white

Structural diversity

Weather resistant

On gypsum, limestone and cement substrates

Various grain size ranges

ECO certified

EC1 plus certified (GEV Emicode)

Product description

Fixit 777

This extra white, weather resistant fine render is used as a mineral based final coat render in exterior and interior areas on cement, limestone and gypsum bound substrates as well as on ETIC systems.This extra white, weather resistant fine render is used as a mineral based final coat render in exterior and interior areas on cement, limestone and gypsum bound substrates as well as on ETIC systems. The substrate must be clean, dry and of adequate load-bearing capacity. Prior treatment with Fixit 475 Primer for mineral-based final renderings is recommended.

Material base

  • Bonding agents
  • Water repellent medium
  • Air-entraining agents
  • Marble sand
  • Water retention agents
  • White lime
  • White cement

Processing information

Building wall outside / inside
Use at a temperature between +5 °C and +30 °C
Add 6,5 - 7,5 litres of water
Apply with a trowel
Finish with a trowel
Protect from sun and rain
Weatherproof, can be stored for 12 months
Please observe the technical data sheet

Application examples

Apartment building ‘Löwengartenstrasse’ renovation Rorschach

Apartment building ‘Löwengartenstrasse’ renovation Rorschach

The apartment building from the 1930s was renovated to improve its energy efficiency. The insulation consists of Fixit 222 Aerogel high-performance insulating plaster with a layer thickness of 4 cm. Fixit 777 fine plaster (2.0 mm grain size) was used as a full-textured finishing coat, which was painted twice with Fixit 786 Si roll-on paint.

Apartment building ‘Hotel Meyerhof’ renovation Hospental

Apartment building ‘Hotel Meyerhof’ renovation Hospental

The former Hotel Meyerhof was converted into an apartment building in 2021 after standing empty for over 30 years. The energy-efficient renovation was carried out using Fixit 222 Aerogel high-performance insulating plaster with a layer thickness of 6–8 cm. To do this, the existing plaster was removed down to the quarry stone masonry and the insulating plaster was sprayed on by machine. The large, white façade surfaces were coated twice with Fixit 777 fine plaster with a grain size of 0.5 mm. The small grey areas were created using a mixture of Fixit 205 base plaster and Fixit 208 base mixture (homemade Worms plaster). Finally, the exterior façade was painted twice with mineral paint.

Detached house renovation Belp

Detached house renovation Belp

The idyllic detached house in Belp with its small tower extension was to be renovated to improve its energy efficiency. To this end, the entire plaster structure was stripped down to the brickwork and rebuilt with Fixit 222 Aerogel high-performance insulating plaster in a layer thickness of 4 cm. Fixit 777 fine plaster with a grain size of 2 mm was used as the finishing plaster, which was then painted twice with individually coloured and biocide-free Calsilit historica mineral paint.

Detached house renovation St. Gallen

Detached house renovation St. Gallen

The façade of the detached house, which dates from the 1940s, was recoated with Fixit 222 aerogel high-performance insulating plaster. To do this, the existing plaster only had to be removed from the reveals and lintels for insulation purposes. The concrete window sills were replaced with insulated Dosteba elements. This significantly reduced the heating requirements.

Historic apartment building renovation Le Locle

Historic apartment building renovation Le Locle

Energy-efficient refurbishment of a historic block of flats in Le Locle made possible with Fixit 222 Aerogel high-performance insulating plaster. Using our unique Fixit 222 Aerogel high-performance insulating plaster, the building, which dates from 1930, has been brought up to current energy efficiency standards – whilst complying with UNESCO’s strict requirements and guidelines.

Portrait of a man in a suit and light blue shirt talking on the phone in front of a wooden wall outdoors

Are you interested in a product or do you need consulting?

Contact us! We will get back to you with advice.

We stand for:

Coordinated logistics

Excellent quality

Individual consulting