Fixit 211
Roughcast mortar with adhesive agent

Machine compatible for economic renovations
Secure application due to adhesion promoter
Can be used as substrate for several base coats

Item number	Packaging type	Quantity per unit	Unit per pallet	Grain size/Colour	Consumption
2000578335	Paper sack	25 kg/unit	40 unit/Pal.	0-3 mm	3 kg/m²

What information regarding this product are you interested in?

Technical documents

TM Fixit 211 Roughcast mortar with adhesive agent en

Technical data sheet

pdf

777 KB

Add to bookmarks Remove from bookmarks

Download

MSDS Fixit 211 Roughcast mortar with adhesive agent en

Material Safety Data Sheet

pdf

403 KB

Add to bookmarks Remove from bookmarks

Download

More recommended products

Fixit 670

Extended cement roughcast / conventional cement base plaster

View product

Portrait of a female construction worker with a white hard hat and grey jacket in front of a brick wall Shell construction with scaffolding

Benefits of this product

Machine compatible for economic renovations

Secure application due to adhesion promoter

Can be used as substrate for several base coats

ECO certified

Product description

The rough cast cement mortar with adhesion promoter is a component of the Fixit renovating plaster system. It improves adhesion to the following plaster layer. Fixit 211 serves as a primer for a range of base coats. Application is very economical as the product is machine-compatible.

Material base

Quarry sand, washed and selected
Bonding agents
Air-entraining agents
Water retention agents
Cements

Processing information

Building wall outside / inside

Use at a temperature between +5 °C and +30 °C

Add approx. 5,0 liters of water

Treat using a float

Apply with a plastering aggregate

Apply with the Enduivit 3

Protect from sun and rain

Weatherproof, can be stored for 6 months

Please observe the technical data sheet

Application examples

Multi-family house «Sternegg Hang» renovation Lucerne

The block of flats, built in 1935, has undergone a complete refurbishment. To improve the building’s energy efficiency in future and ensure a comfortable indoor climate, it was refurbished using Fixit 222 Aerogel high-performance insulating plaster. The plaster was applied using the spray-plastering method. Our Fixit 745 design plaster was used as the finishing coat. The two-tone façade design is particularly striking with its pastel shades of green.

Parish assistant's house renovation Bremgarten

The late Gothic building probably served as a chaplaincy for the Bullingerpfründe and became a parish assistant's house after the recatholisation in 1531. The building, which is now a listed building, has been renovated several times over the centuries – most recently in 1990. Following the conversion and energy-efficient renovation in 2016, the historic building continues to be used for residential purposes. A studio was created on the ground floor, which could also be used as a one-room flat with a small kitchen and bathroom. A 2.5-room flat was created on the first floor and a 4.5-room maisonette flat on the second floor. In addition, a basement extension with a new archive for the parish was built.

Multi-family house renovation La Chaux-de-Fonds

The four-storey apartment building in La Chaux-de-Fonds was renovated to improve its energy efficiency using Fixit 222 Aerogel high-performance insulating plaster. Before applying the thermal insulation plaster using a spraying technique, the substrate was pre-treated accordingly: a coating and primer were used to ensure good plaster adhesion. The mineral finishing plaster was painted twice with an orange façade paint.

Apartment building ‘Löwengartenstrasse’ renovation Rorschach

The apartment building from the 1930s was renovated to improve its energy efficiency. The insulation consists of Fixit 222 Aerogel high-performance insulating plaster with a layer thickness of 4 cm. Fixit 777 fine plaster (2.0 mm grain size) was used as a full-textured finishing coat, which was painted twice with Fixit 786 Si roll-on paint.

Historic apartment building renovation Lausanne

The historic apartment building in Lausanne, built in 1905, underwent an energy-efficient renovation using Fixit 222 Aerogel high-performance insulating plaster with a layer thickness of 3 cm. This allowed the exterior appearance with the window frames, balconies and cornices to be preserved. Fixit 203 finishing plaster with hydraulic lime in a grain size of 0–1 mm was used as the finishing plaster. This was painted twice with Fixit 786 Si silicate-silicone roll-on paint.

Portrait of a man in a suit and light blue shirt talking on the phone in front of a wooden wall outdoors

Are you interested in a product or do you need consulting?

We stand for:

Coordinated logistics

Excellent quality

Individual consulting

Contact form

Fixit 211
Roughcast mortar with adhesive agent

What information regarding this product are you interested in?

Technical documents