Fixit 222
Aerogel High Performance Insulating Plaster

Fixit 222
  • Thin insulation layers with efficient U-value
  • Capillary active and water vapour permeable
  • Can be applied by machine, therefore economic
Item numberPackaging typeQuantity per unitUnit per palletConsumption
2000634909 Paper sack 50 L/unit 30 unit/Pal. 1 L/m²/mm

What information regarding this product are you interested in?

Technical documents

TM Fixit 222 Aerogel High Performance Insulating Plaster en

Technical data sheet

pdf
742 KB
SDB Fixit 222 Aerogel High Performance Insulating Plaster en

Material Safety Data Sheet

pdf
418 KB
Certificate | Fixit 222 Aerogel High Performance Insulating Plaster

Certificate/Test seal

pdf
860 KB
Certificate EPD | Fixit 222 Aerogel High Performance Insulating Plaster

Certificate/Test seal

pdf
1 MB
Certificate ETA | Fixit 222 Aerogel High Performance Insulating Plaster

Certificate/Test seal

pdf
310 KB
Brochure | Fixit 222 Aerogel Expertise and application guidelines

Fach- und Produktinformation

pdf
8 MB
Brochure | Fixit 222 Aerogel Long-term measurement results after 13 years

Fach- und Produktinformation

pdf
10 MB

Portrait of a female construction worker with a white hard hat and grey jacket in front of a brick wall Shell construction with scaffolding

Benefits of this product

Thin insulation layers with efficient U-value

Capillary active and water vapour permeable

Can be applied by machine, therefore economic

Can be used as different thermal insulating variants both indoor and outdoors

Surface visible with no marks

Accurate wall reproduction possible

Product description

Fixit 222

Water vapour permeable, high performance insulating plaster. Excellent thermal insulation achieved with very thin layers. Fixit 222 is the ideal plaster for indoor and outdoor thermal renovation work and offers high aesthetic quality. The special aerogel material, developed in cooperation with Empa, reduces the thermal conductivity coefficient λD to just 0,028 W/(mK). In addition, as a limestone-based mortar it is extremely economic.

Material base

  • Aerogel granulate
  • Hydraulic lime NHL 5
  • Water repellent medium
  • Hydrated lime
  • Air-entraining agents
  • Light mineral aggregate
  • Water retention agents
  • White cement

Processing information

Building wall outside / inside
Use at a temperature between +5 °C and +30 °C
Add approx. 12,5 liters of water
Apply with a plastering aggregate
Protect from sun and rain
Weatherproof, can be stored for 12 months
Please observe the technical data sheet

Application examples

Multi-family house «Sternegg Hang» renovation Lucerne

Multi-family house «Sternegg Hang» renovation Lucerne

The block of flats, built in 1935, has undergone a complete refurbishment. To improve the building’s energy efficiency in future and ensure a comfortable indoor climate, it was refurbished using Fixit 222 Aerogel high-performance insulating plaster. The plaster was applied using the spray-plastering method. Our Fixit 745 design plaster was used as the finishing coat. The two-tone façade design is particularly striking with its pastel shades of green.

Parish assistant's house renovation Bremgarten

Parish assistant's house renovation Bremgarten

The late Gothic building probably served as a chaplaincy for the Bullingerpfründe and became a parish assistant's house after the recatholisation in 1531. The building, which is now a listed building, has been renovated several times over the centuries – most recently in 1990. Following the conversion and energy-efficient renovation in 2016, the historic building continues to be used for residential purposes. A studio was created on the ground floor, which could also be used as a one-room flat with a small kitchen and bathroom. A 2.5-room flat was created on the first floor and a 4.5-room maisonette flat on the second floor. In addition, a basement extension with a new archive for the parish was built.

Detached house ‘Chesa Sonder’ renovation Zuoz

Detached house ‘Chesa Sonder’ renovation Zuoz

This historic building, dating from 1651 and classified as worthy of preservation, shows the centuries on its exterior façade. For the energy-efficient renovation, Fixit 222 Aerogel high-performance insulating plaster was applied to the façade in a layer thickness of 7–8 cm using a spraying method. Fixit 203 finishing plaster with hydraulic lime was applied as the finishing coat and then painted twice with Fixit 784 OF mineral sol-silicate paint. The exterior wall adjacent to the stable next to the building was insulated with 140 mm thick COMPACT PRO rock wool insulation boards.

Multi-family house renovation La Chaux-de-Fonds

Multi-family house renovation La Chaux-de-Fonds

The four-storey apartment building in La Chaux-de-Fonds was renovated to improve its energy efficiency using Fixit 222 Aerogel high-performance insulating plaster. Before applying the thermal insulation plaster using a spraying technique, the substrate was pre-treated accordingly: a coating and primer were used to ensure good plaster adhesion. The mineral finishing plaster was painted twice with an orange façade paint.

Apartment building ‘Löwengartenstrasse’ renovation Rorschach

Apartment building ‘Löwengartenstrasse’ renovation Rorschach

The apartment building from the 1930s was renovated to improve its energy efficiency. The insulation consists of Fixit 222 Aerogel high-performance insulating plaster with a layer thickness of 4 cm. Fixit 777 fine plaster (2.0 mm grain size) was used as a full-textured finishing coat, which was painted twice with Fixit 786 Si roll-on paint.

Portrait of a man in a suit and light blue shirt talking on the phone in front of a wooden wall outdoors

Are you interested in a product or do you need consulting?

Contact us! We will get back to you with advice.

We stand for:

Coordinated logistics

Excellent quality

Individual consulting